If a long time has passed since you were supposed to buff an area, try the method above. If it doesn’t work and it is still hazy and visible, our suggestion is to complete covering the whole car with Ceramic Coating first before doing anything with the problematic area.

It’s a process that you can follow if you choose to install your own paint coating or paint protection solution. It’s also what professional detailers use to prepare the vehicle for paint protection film.

After one week has passed and the coating has fully cured and crystallized, follow the below mentioned suggestions to effectively maintain your ceramic coated vehicle. Premium ceramic coating packages offer warranties anywhere from 3 to 7 years. While this warranty ensures the sturdy protection of the coating, it necessarily doesn’t promise you that the ceramic coating won’t deteriorate, or that its performance won’t reduce. For example, car tires have average durability and life expectancy, but other factors like bad roads or frequent off-roading will reduce their life span and performance.

Seats, Steps & Carts

If you want to remove the coating without using any chemicals, you can use a clay bar. Start by spraying the area with a clay lubricant, and then gently run the clay bar over the surface. Be sure to use gentle pressure, as too much force can damage the paint. Continue moving the clay bar over the surface until you have removed all of the coatings.

Punch-It Ceramic Detailer

The new paint will cure for up to a month in reality, but after the initial 24 hours, the paint is hard enough to be worked with. Note that you can use this technique only to fill very small areas of damage on your paint. After 24 hours, you want to sand down the new paint, which is leveled with the old paint. Spray some regular water onto the area you are about to sand and use the 600-grade sandpaper. Work the area using a sanding block and have the sandpaper wrapped around the sanding block.

Always wash your car with high-quality ceramic soap, then apply a microfiber wash mitt. We suggest not washing the car out of direct sunlight until the paint is cool. It will allow the foam to break down all the dirt, dust, mud, and bugs from the paint. Curing times may vary depending on the products you use and the environment you’re in. Heat, humidity, temperature, wind, etc., can all impact a coating’s flash time.

Ceramics do not work like bulletproof surfaces as the clear coat can have oxidation, light scratches, and swirls. Although superior to conventional waxes, ceramic coatings do require general upkeep from time to time to keep them performing like the day we applied it. In a way, it can weaken over time and your investment can be jeopardized through lack of upkeep. Read more about 9H Keramikversiegelung here. Ceramic coating is currently the most popular paint protection product worldwide!.

Our personal preference is drying using a cordless leaf blower which will knock off 90% of the water from the surface. Other soaps may contain silicones and waxes that can clog the finish of your vehicle. If we do not have availability for washes and you prefer to wash yourself, visit the CarPro forums at to watch how to videos and further support. Successful ceramic coating application is achievable with proper preparation and adherence to the instructions.

Some products can be used outdoors, but it’s still recommended to let your car cool down before coating. Ensuring it’s within the ideal temperature range (50 to 70 degrees Fahrenheit) will help the glass coating product adhere to the substrate well. Claying pulls embedded particles like brake dust, metal dust, road grit and other pollutants from your car’s surface — which can all be difficult to remove by washing alone. We’re going to assume the car’s coating has properly cured and is ready for its first post-coating wash. It’s important to let the coating fully cure before attempting a contact wash. Many people claim their coating isn’t performing the way they expected, and more often than not it comes down to how the coating is being maintained.

It also ensures that the new coating will have a smooth surface to bond to and restores the shine of your paint. Curing and Aftercare – After applying the coating to all the glass, it is recommended to move the vehicle under sunlight to help speed up the curing process. At this point, make sure no water touches the glass for at least 48 hours. This video will provide some important details as to how a nano ceramic coating is designed to work. Make sure to stay out of the sunlight and only spray the ceramic wax onto cooler surfaces. Sprayway SiO2 Ceramic Wax will give your vehicle advanced protection from, and resistance against, UV rays and heat, but will need to remain cool to cure. Unless you have a temperature-controlled garage, try to pick a clear, cool day to ceramic wax your car.